| 1. | Resistance strain gauge rolling force measuring instrument
电阻应变式轧制力测量仪 |
| 2. | Adaptive modification of the rolling force prediction
轧制力预报的自适应修正 |
| 3. | Magnetoelastic rolling force measuring instrument
磁弹性式轧制力测量仪 |
| 4. | The results of the calculation are very accurate when compared with the experimental results
采用该公式计算出的轧制力与实验值基本符合。 |
| 5. | Distributed rolling force signal acquisition and fault diagnostic system based on field bus
基于现场总线分布式轧制力信号采集及故障监测系统 |
| 6. | Abstract : the artificial intelligence method to setup and control rolling force is researched
文摘:研究了轧制力设定控制的人工智能实现方法。 |
| 7. | The application of the attached type ergometric sensor for monitoring the rolling force of the heavy plate mill
附着式测力传感器在大型轧机轧制力监测中的应用 |
| 8. | There are two kinds of method to measure the rolling force : stress measure and sensor measure
机械工程中测量轧制力的方法有两种：应力测量法和传感器测量法。 |
| 9. | Simulated rolling force , temperature value and microstructure are of good agreement with the measured results
模拟得到的轧制力能参数、温度、组织分布与实测数据基本一致。 |
| 10. | On - line results indicate that the predicted results are more accurate with a relative error within 3 %
应用结果表明，采用本方法预报轧制力时精度优于传统的数学模型，相对误差可以控制在3 %以内。 |
