| 1. | Max temperature : 265 设计温度265 |
| 2. | The capacity of saving energy increases along with the increase of indoor design temperature 节能效果随着室内设计温度的提高而提高。 |
| 3. | Control temperature 67 - 75 degree ensure the airend and oil andtec long - life 最佳的设计温度,开启温度为67 - 75度,确保机体及油品等各零部件的长寿命。 |
| 4. | Research is continuing to determine the optimum materials for such sensors and to achieve an improvement in resolution of temperature - sensing 光纤光栅同时也对压力敏感,因此在设计温度传感器的时候应加以考虑。 |
| 5. | As far as energy efficiency buildings , design indoor temperature is increased , but its energy consumption is less than that in ordinary buildings at the temperature of 18c 研究表明,对节能建筑而言,虽然室内设计温度提高了,但是采暖能耗比非节能建筑在18时的能耗低。 |
| 6. | Of course , increase of design indoor temperature must lead to increase of energy consumption , so the feasibility of 20c is demonstrated from the aspect of building consumption 当然,温度的提高必然带来能耗的增加,因此从建筑能耗方面论证了室内设计温度提高为20的可行性。 |
| 7. | Water supply temperature , indoor design temperature , distance of embedded pipe , diameter of embedded pipe and material of ground floor are important factors influencing cooling and heating radiation floor system 摘要影响冷暖辐射地板系统的几个重要因素有供水温度、室内设计温度、埋管管距、埋管管径和地面层材料。 |
| 8. | The study shows that compared with the energy consumption of conventional central air - conditioning system with primary return air , the heat pipe air - conditioning system can save cooling and reheating energy 研究结果表明:在相同的室内设计温度下,采用热管式空调机组处理空气的一次回风集中空调系统比常规的一次回风集中空调系统节省冷量和再热量。 |
| 9. | The paper puts forward an idea of designing for stove temperature of injection machine control system by designing the fuzzy set theory , and introduces the structure of the fuzzy controller , the design procedures of the fuzzy control regulations and realization method 摘要根据注塑机料筒温度的自动控制问题,提出了采用模糊控制理论来设计温度控制系统的思路,并介绍了模糊控制器的结构、模糊控制规则的设计及实现方法。 |
| 10. | Taking an office building in guangzhou as an example , this paper investigated the energy consumption of a central air - conditioning system with primary return air using heat pipe air - conditioner at different indoor design temperatures 摘要以广州地区的办公建筑为例,就一次回风集中空调系统在空气处理过程中采用热管式空调机组时,不同室内设计温度下的空调系统能耗进行了分析,并且与常规的一次回风集中空调系统的耗能量进行了比较。 |