| 1. | A coating , as of syrup , applied to food
冻胶层浇在食物表面的覆盖物（如糖浆） |
| 2. | Rubber hoses - determination of abrasion resistance of the outer cover
橡胶软管外胶层耐磨耗性能的测定 |
| 3. | Two cell layers ( diploblastic ) separated by a gelatinous mesoglea
两层细胞(两胚层) ，中间是凝胶状的中胶层。 |
| 4. | Internal and external rubber layer
内外胶层 |
| 5. | Laminated wood plastics . compreg determination of glueline shear strength parallel to grain
木质层积塑料.顺纹胶层剪切强度的测定 |
| 6. | It is shown that the thickness of plct ( x ) is non - linear increased with increase of layers
发现plct x ）薄膜的厚度随着甩胶层数的增加而呈非线性的增加。 |
| 7. | By digitization , we optimize the intensity data of the incidence beam at the vicinity of start point and end point . 3
通过选择合适的涂胶参数，在凹透镜表面上进行了薄光刻胶胶层的均匀涂布。 |
| 8. | Construction : it is composed of a inner rubber layer , innerrubber protectionlayer , middle rubber layer , steel wire spirallayerand ext - ernal rubber cover
结构：由内胶层、内胶保护层、中胶层、钢丝缠绕层和外胶层组成。 |
| 9. | After the length of the gap increasing to a certain value the load bearing ability and actual shear strength intends to decrease
研究中还发现间隙所处的位置对接头的抗剪强度有较大的影响，胶层端部预留间隙使接头的承载能力和实际强度均显著下降。 |
| 10. | Antiflaming and antistatic high pressure wire spiral rubber hose is consist of an inner , a protectionlayer , middle layer , wire reinforcement layer , and a rubber cover
阻燃抗静电高压钢丝缠绕胶管结构是由内胶层、内胶保护层、中胶层、钢丝缠绕层和外胶层组成。 |
