English translation for "耐磨蚀"
|
- antifret
Related Translations:
耐磨强度: scuff resistancescurf resistance 耐磨度: abrasive resistancefastness to crockingfastness to rubbingwear resistancewearing strength 耐磨钢: abrasion resistant steelabrasion-resistant steelwear resistant steelwear resisting steelwear-resistant steelwear-resisting steel 耐磨涂料: wear-resistant paint 耐磨板: wear platewear resisting platewear-resisting platewearing plate 耐磨力: abrasion strengthabrasive resistancetear resistancewearing capacity
- Example Sentences:
| 1. | The objection to the placer origin have centred around the softness of uranium compounds .
反对砂矿成因的论据主要是：铀的化合物不耐磨蚀。 | | 2. | Standard test methods for abrasion resistance of porcelain enamels
工业瓷器瓷漆的耐磨蚀的标准试验方法 | | 3. | Inadequate resistance to abrasive wear will lead to rapid loss of clearances and drop in pump performance
如果耐磨蚀能力不足，则将导致间隙迅速增大和泵性能下降。 | | 4. | Yet , other polymer - coating materials are being used for protection against corrosion , aggressive chemical environments , thermal shock , impact , wear , and abrasion
甚至，还有的聚合物涂料被用于防腐蚀，防化学环境的侵蚀，防热冲击，防冲击，防磨损、耐磨蚀的方面。 | | 5. | The need for resistance to both adhesive and abrasive wear is often greatest in wear rings and similar components , where close clearances must be maintained between rotating and stationary components
通常，须在转子与定子之间保持较小间隙的零件，如密封环及类似零件，有耐磨蚀和耐磨损的要求。 | | 6. | X - ray diffraction spectrum , empa methods and several tests including mechanical properties , electrochemistry , corrosion wear , on - site plate hanging , the microstructure of steel has been observed and analyzed , performance has been studied , and corrosion - abrasion , fragility mechanism , and microalloy application in ferritic stainless steel have been explored comprehensively . the test results of electrochemistry , corrosion wear and on - site plate hanging have been analyzed . the analytical result shows that crsomo has enough corrosion resistance in phosphoric acid slurry because it has high chromium and low carbon
通过实验室的电化学试验、腐蚀磨损试验和磷肥厂的现场挂片试验结果分析，表明： cr30mo铁素体不锈钢高铬低碳的配合，保证其在磷酸料浆中具有足够的耐蚀性： cr30mo中( fe ， cr ) _ 23c _ 6 、 ( fe ， cr ) _ 7c _ 3 、 mo _ 2c 、等碳化物硬质点从基体的弥散沉淀析出可提高钢的硬度和耐磨性，使得钢在磷酸料浆中具有良好的耐磨蚀效果。 | | 7. | So cr30mo has good corrosion - abrasion resistance in phosphoric acid slurry . based on the analyses of microstructure , mechanical properties , corrosion - abrasion resistances and fracture of cast ferritic stainless steel cr30mo with various carbon content , it can be affirmed that high carbon is advantage to increase steel hardness , but disadvantage to suppress brittleness and increase corrosion - abrasion resistance
对不同含碳量的铁素体不锈钢cr30mo的组织结构、力学性能、磨蚀性能和断口形貌的分析后认为，碳含量增大，对钢的硬度提高有利，但对钢的韧性、耐磨蚀性很不利。 |
- Similar Words：
- "耐磨泡沫体" English translation, "耐磨强度" English translation, "耐磨青铜" English translation, "耐磨清漆" English translation, "耐磨色牢度" English translation, "耐磨蚀节流器" English translation, "耐磨蚀碳黑" English translation, "耐磨蚀性" English translation, "耐磨蚀轴承" English translation, "耐磨试验" English translation
|
|
|
