English translation for "炭化层"

carburization zone
charring layer

Related Translations:

炭化:  anthracolithizationanthracolitizationcharingcharringcharry

炭化刀:  carbide tool

炭化纱:  carbonized yarn

炭化斑:  charred spotcharring spot

炭化速度:  charing rate

炭化木材:  charred wood

炭化的:  charredcharry

炭化试剂:  charring reagent

土法炭化:  pile charringpilecharring

炭化长度:  char lengthlength of char

Example Sentences:

	1.	Finally , the numerical technique was used to investigate influence that different parameters on ablation rate . the relationship between oxygen percentage , pressure , depth of charred layer and ablation rate were obtained 最后计算了不同参数对材料烧蚀率的影响，得到了烧蚀率随富氧含量、试验段压强以及炭化层厚度变化的趋势。
	2.	Ferrous metals , non - ferrous metals , ic thin sections , coatings , ply - metals ; glass , ceramics , agate , precious stones ; hardness testing such as that on the depth and the trapezium of the carbonized layers and quench hardened layers 黑色金属、有色金属、 ic薄片、层压金属、表面涂层；玻璃、陶瓷、玛瑙、宝石等；炭化层和淬火硬化层的深度及梯度的硬度测试。
	3.	Because thermal insulation was in oxygen - riched condition of afterburner and charred layer was porous , oxygenous gas in mixture would penetrate into charred layer and chemical reaction would take place in whole charred layer , which intensified the ablation process 由于绝热层处于二次燃烧室富氧的环境中，而且炭化层为疏松多孔状物质，因此将化学反应引入到整个炭化层中。
	4.	The ablation process in oxygen - riched condition was explored and a physical model was established . electron microscope scanning showed that thermal insulation would form three layers during ablation , namely , primitive material layer , pyrolytic layer and charred layer 在实验基础上对富氧烧蚀过程进行了分析，建立了富氧条件下以基体层、热解层、炭化层三层结构为基础的烧蚀物理模型。
	5.	According to the physical model , a mathematical model and computational method were proposed . an axially symmetric transient thermal conduction equation was put forward , which included material pyrolysis , pyrolysis gas flow and chemical reaction in charred layer . chemical reaction was controlled by chemical dynamics , and the reaction rate was computed using arrhenious equation 针对物理模型提出了相应的数学模型和数值计算方法，在材料内部建立了二维轴对称的非稳态导热控制方程，其中加入了材料热解、热解气体流动以及炭化层内的化学反应等因素的影响，化学反应由化学动力学控制，通过arrhenius公式确定其反应速率。

Similar Words：

"炭画橡皮" English translation, "炭画纸" English translation, "炭化" English translation, "炭化斑" English translation, "炭化残留物" English translation, "炭化长度" English translation, "炭化刀" English translation, "炭化刀，硬质合金刀具" English translation, "炭化的" English translation, "炭化防腐" English translation