English translation for "注入速率"
|
- injection flow rate
rate of injection
Related Translations:
注入大气: injection into the atmosphere 注入水量: injected water volumequantity of injected watervolume of water input 硼酸注入: boric acid injection
- Example Sentences:
| 1. | The txrate parameter is the injection rate
Txrate参数就是注入速率。 | | 2. | An injection rate of 1 maps roughly to 13 concurrent clients
如果注入速率为1 ，则对应着大约有13个并发客户机。 | | 3. | In the specjappserver2004 benchmark , the size of the system is specified by the injection rate
在specjappserver2004基准中，系统的大小是由注入速率（ injection rate ）指定的。 | | 4. | To load the database , we use the loaddb . bat script where the injection rate is passed in as a parameter
为了装载数据库，我们使用loaddb . bat脚本，并在其中以参数的形式传递注入速率。 | | 5. | For example , the commands below will delete the data in the database and load the database supporting an injection rate of 10
例如，下面的命令将删除数据库中的数据，并装载支持注入速率10的数据库： | | 6. | The configuration supports an injection rate of 785 , which translates to roughly 10 , 000 concurrent users , and produced more than 1 , 300 business transactions per second
该配置支持785的注入速率，相当于大约10 , 000个并发用户，每秒钟产生1 , 300多条业务事务。 | | 7. | During the setup in the previous sections , a database that is supporting a small number of users injection rate 2 has been created and the corresponding load has been applied to the system for functional testing purpose
在前面几节的安装中，创建了一个只支持少量的用户（注入速率为2 ）的数据库，并对系统应用了相应的负载，以进行功能测试。 | | 8. | In section one , we analyze the mechanism of lwi gain , and study the effects of the rabi frequency q of the driving field , the injection rates ratio rb / r ~ , the exit rate r0 , the decay rates ~ and rab between atomic levels , as well as 3 incoherent pump rate r on the gain without inversion , dispersion and population difference of the system . in section two , we discuss the effects of the detuning of the driving field and the probe field on the gain
在第一节中分析了无粒子数反转激光增益产生的机制、研究了驱动场的rabi频率、粒子注入速率比值r _ b / r _ c 、粒子退出速率r _ o 、能级间的自发衰减速率r _ ( c - b ) 、 r _ ( a - b )和非相干泵浦速率r对增益、色散和粒子数差的影响；第二节讨论了驱动场和探测场的失谐对无粒子数反转激光增益的影响。 | | 9. | In chapter 3 , we studied the effect of gaussian transverse profile for the driving and laser fields on lasing without population inversion ( lwi ) in a closed v - type system and an open v - type system . moreover , we discussed also the effect of the unsaturated gain coefficient , the cavity - damping rate , the ratio of the atomic injection rates and atomic exit rate on the corresponding systems . in chapter 4 , we mainly discussed the effect of doppler broadening on the gain , dispersion and the frequency up - conversion of the open v - type lwi system and compared the differences and the same between the open system and the corresponding closed system
发现： ( 1 )在考虑doppler展宽的情况下，通过选取合适的实验室条件(比如合适的原子环境温度等)可得到合适doppler展宽值，从而使系统获得最佳增益； ( 2 )要想实现系统的频率上转换，同时又要获得足够强的无反转激光增益，则系统频率转换比不能选取的太大； ( 3 )对于开放系统，比较小的粒子注入速率比与退出速率对产生无反转激光是有利硕士学位论文摘要的： （ 4 ）由于dopp1oy展宽的存在，当探测场与驱动场的传播方向相反时，增益在探测场失谐的某一段区域产生振荡，且振荡的振幅、频率失谐范围的大小与dopper展宽的取值有关。 | | 10. | Using commercial finite element software ansys , the numerical simulations of the forming processes of decorated rib and handle , which are key positions in the door outer are conducted and investigated the differences of vpf and tradition forming . by using numerical simulation that investigates the effects of viscous injection flow rate on plank ’ s vpf formability and based on those investigated four - aluminum alloy ’ s vpf . the die has been designed for the door outer ’ s viscous pressure forming
首先采用商用有限元分析软件ansys对车门成形中的关键部位装饰筋和把手的成形进行了数值模拟,对比分析了粘性介质压力成形与刚性模成形的特点;分析了粘性介质压力成形过程中,粘性介质的注入速率对成形试件壁厚分布的影响,在此基础上对四种常用的6000系列铝合金板材的粘性介质压力成形进行了有限元数值模拟。 |
- Similar Words：
- "注入水泥的膨胀式套管封隔器" English translation, "注入水水质" English translation, "注入水突破" English translation, "注入瞬间" English translation, "注入速度测定装置" English translation, "注入损耗" English translation, "注入锁定" English translation, "注入锁定半导体激光放大器" English translation, "注入锁定本地振荡器" English translation, "注入锁定环形放大器" English translation
|
|
|
