English translation for "残余热"
|
- residual heat
Related Translations:
残余敞: residual field method 超新星残余: relic of supernova 收缩残余: contraction-remainder 残余耦合: residual couplingresidual link 残余挥发物: residual volatile matter
- Example Sentences:
| 1. | A short fiber reinforced composition and interface residual stress analysis
短纤维增强复合材料纤维和界面层残余热应力分析 | | 2. | The residual thermal stress of the tz - 3y20a / mo multiplayer composite has been forecasted by finite element method
Marc有限元软件计算了叠层材料的残余热应力。 | | 3. | Moreover , the technique of elements deactivating and activating was used in fe analysis to simulate the manufacturing process of the packaging structures . the residual thermal deformations and stresses during the process were obtained
另外采用有限元计算中的单元死活技术成功模拟了封装结构的制造过程，由此得到在制造过程中所产生的残余热变形和应力。 | | 4. | Because there are many kinds of matrixes in titanium matrix composite , we select some typical ones as investigated subject in many titanium alloys or titanium aluminide intermetallics , and then simulate the distribution of thermal residual stresses under the appropriate composites fabrication and heat treatment parameter . we not only hope to seek better titanium matrix , but also discover the relationship between the material properties and the thermal residual stresses , and then provide some theoretical guidance for the selection of the matrix in titanium matrix composites
鉴于当前钛基复合材料中钛基体的多样性，我们将在各种类型的钛合金和钛铝金属间化合物中，挑选出较为典型的作为研究对象，利用本文得到的较为理想的复合材料加工和热处理工艺参数，逐一模拟它们的残余热应力，找到残余热应力分布较为理想的钛基体，并且，希望能够寻找到材料性能与热残余应力的相互关系，为钛基复合材料基体的选择提供一定的理论指导。 | | 5. | The outcome indicates that the graded composite can effectively reduce the residual thermal stress . when the distribution p is 1 . 2 , the relaxation effect is m ost conspicuous and up to 60 % . finally , the atio5 / al2o3 functionally graded material is fabricated by the power stacking - method based on the fabrication technique and structure design discussed above
计算结果表明，通过梯度复合可以有效地缓和梯度材料制备过程中所产生的残余热应力，当梯度材料分布指数p值为1 . 2时，热应力缓和的作用最显著，缓和效果达60 。 | | 6. | It was found that the interfacial bonding of 93w - ofc was both the joining action of ofc / w grains and that of ofc / ni - fe binders , whereas the joining of ofc to tc4 could be seen as the mutual intense diffusion effect between ofc / tc4 and as a result cu - ti intermetallic compounds were formed at the joint . the joining of tc4 - a1 and a1 - mb2 were also attributed to the result of diffusion between elements ti - al and al - mg respectively . on the other hand , residual thermal stress and stress - induced distortion were produced at the joint simultaneously due to the difference in thermal expansion coefficient of different welding " materials
研究表明， 93w与ofc的界面连接是ofc与93w中w晶粒的连接以及ofc与93w中ni - fe粘接剂的连接共同作用的结果； ofc与tc _ 4连接界面的形成是由于ofc与tc _ 4之间发生反应扩散，并由此在二者接头处生成了cu - ti金属间化合物的中间相； tc _ 4 - al的连接与al - mb _ 2的连接则分别是其基体元素ti 、 al之间和al 、 mg之间元素互扩散的结果，另外，由于热膨胀系数的差异，扩散焊接后在不同焊件的接头处存在残余热应力并由此引起接头的形变。 | | 7. | The results of fe simulation shows that the mental package made abroad has lower thermal stress and higher reliability during working and manufacturing process than that made in china . it is mainly because that the two packaging structures were manufactured in different forming processes : one was punched and the other was brazed
有限元计算的结果表明，采用冲压一次成型的国外封装外壳比采用异材压焊的国产封装外壳的工作热应力和制造残余热应力要小很多，具有更高的可靠性。 |
- Similar Words：
- "残余燃料油" English translation, "残余燃料油污染" English translation, "残余燃烧" English translation, "残余燃烧设备" English translation, "残余染色体" English translation, "残余热辐射" English translation, "残余融化层" English translation, "残余熔浆" English translation, "残余熔料" English translation, "残余熔体" English translation
|
|
|
