| 1. | Study of modification of nylon 11 by nano - meter sio
纳米二氧化硅改性尼龙11的研究 |
| 2. | Two layer nylon - 11 based polyamide coating system for interior and exterior of steel water pipe , connections , fittings and special sections
钢水管连接件配件及特殊部件的内外两层尼龙11基聚酰胺涂覆系统 |
| 3. | Melting point of nylon 11 blend alloy decreases as function of compatibilizer , and make clear that crystalline integrity of nylon 11 increases
尼龙11合金的熔点随着相容剂的加入而降低，表明了其结晶的不完整性增加。 |
| 4. | Nylon 11 is a kind of engineering plastics having good comprehensive property . because of expensive price , its application is definitely restricted
尼龙11是一种综合性能良好的工程塑料，但由于其价格昂贵，使其应用受到一定的限制。 |
| 5. | The crystallinity reach its peak when the content of epoxy is 1 % , with the increase of epoxy resin content , the crystallinity of nylon 11 alloy decreases
环氧树脂用量为1时，尼龙11共混合金体系的结晶度最大，此后随着环氧树脂的加入，尼龙11结晶度随之降低。 |
| 6. | Blending is an effective means of improving properties , reducing cost and developing new species . in the course of study , compatible agent ( pe - mah ) is prepared firstly
通过改性来改进产品性能和降低生产成本是尼龙11开发新品种、降低生产成本和拓宽应用领域的有效途径。 |
| 7. | Differential thermal analysis ( dsc ) indicates that acid - anhydride reacts with amidogen in nylon 11 to form chemical bond and boost up bonding strength of interface
Dsc分析表明，接枝物中的酸酐基团与尼龙11中的氨基发生反应，形成化学键，使得界面粘接力增强，从而使冲击强度得到提高。 |
| 8. | Under the condition of their tensile strength being kept , impact strength of the prepared alloys increases 5 - 8 times and the cost of the alloys reduces 26 % comparing to pure nylon 11
与纯尼龙11相比，所制得的合金在保持拉伸性能基本不变的前提下，冲击强度提高了5 8倍，成本降低了26 。 |
| 9. | Through the study of rheological property on the alloy materials , the article research result provides a reliably experimental evidence for moulding technology and instructs practical produce
通过对合金流变性能的研究，为尼龙11合金的成型工艺提供了可靠的实验依据，对实际生产具有较大的指导意义。 |
| 10. | Morphological structure analysis indicates that the addition of pe - mah induces surface tension , makes phases uniformity , enhances bonding strength of interface and improves compatible property
Sem分析表明，接枝物的加入，降低了界面间的表面张力，使两相分散均匀，分散度提高，增强了相间的粘接力，改善了尼龙11与聚乙烯的相容性。 |
