English translation for "复合材料基体"
|
- matrices of composite material
Related Translations:
整套复合材料: whole series of bonded materials 先进复合材料: acm advanced composite materials 取向复合材料: aligned composite materialoriented composite material 复合材料试样: composite test specimen 高级复合材料: advanced composite materials (acm)advanced composites 复合材料力学: compound material mechanicsmechanics of complex materialsmechanics of composite materialsmechanics of composites 纳米复合材料: nano composite materialsnanocomposite 尖端复合材料: advanced composite materials
- Example Sentences:
| 1. | Development status of frp composites matrix resin
玻璃钢复合材料基体树脂的发展现状 | | 2. | Numerical approach to failure process in brittle and heterogeneous matrix filled with particles
颗粒增强复合材料基体破坏过程的数值模拟分析 | | 3. | Stress distribution and deformation characteristics of matrix in short fiber reinforced metal matrix composites
短纤维增强金属基复合材料基体中的应力分布及其变形特征 | | 4. | A sicp reinforced al - cu alloy and al matrix composites are fabricated by a new method - electromagnetic centrifugal casting , the effects of rotational rate for centrifugation , magnetic density , particle size and matrix on the distribution of particles and microstructure of matrix are studied
首次利用电磁离心凝固方法制备sic _ p al基和sic _ p al - cu基复合材料，研究了离心转速、颗粒尺寸、磁场和基体对颗粒分布以及对复合材料基体组织的影响。 | | 5. | Because there are many kinds of matrixes in titanium matrix composite , we select some typical ones as investigated subject in many titanium alloys or titanium aluminide intermetallics , and then simulate the distribution of thermal residual stresses under the appropriate composites fabrication and heat treatment parameter . we not only hope to seek better titanium matrix , but also discover the relationship between the material properties and the thermal residual stresses , and then provide some theoretical guidance for the selection of the matrix in titanium matrix composites
鉴于当前钛基复合材料中钛基体的多样性，我们将在各种类型的钛合金和钛铝金属间化合物中，挑选出较为典型的作为研究对象，利用本文得到的较为理想的复合材料加工和热处理工艺参数，逐一模拟它们的残余热应力，找到残余热应力分布较为理想的钛基体，并且，希望能够寻找到材料性能与热残余应力的相互关系，为钛基复合材料基体的选择提供一定的理论指导。 | | 6. | The piezoelectric laminated shell is a kind of adaptive structures , and integrated with composite base structure , piezoelectric sensor / actuator and controller units , which can observe the external disturbances by sensor , then change the structural state to adapt for the environment ' s change by the actuator , through regulation of controller units
压电层合壳是一种由复合材料基体、压电作动传感元件和控制单元所组成的自适应结构。它利用传感元件感受外界环境作用下的响应信息，在控制单元单元的调节下，通过驱动作动元件去改变结构状态，以适应环境条件的变化。 | | 7. | The thermal shock resistance of the prepared material is explored too . processing parameters were comprehensively investigated to achieve better mechanical strength and microstructure , experimental results indicate that suitable amount of sintering aids can promote the development of sian siaona ) and increase the crystal size , while excessive sintering aids amount will exert a side effect ; biding phase increases obviously with si powder additive which greatly improve the strength of the composite
本论文着重探讨了在利用该方法制备si _ 3n _ 4 ( si _ 2on _ 2 ) - sic复合材料过程中的烧结助剂引入量、 si粉加入量、 sic颗粒级配和氮化制度对复合材料基体相生成的影响及对复合材料强度的影响，同时也初步探讨了si _ 3n _ 4 ( si _ 2on _ 2 ) - sic复合材料的抗热震性能。 |
- Similar Words：
- "复合材料层压板" English translation, "复合材料发动机机匣" English translation, "复合材料分类" English translation, "复合材料风管" English translation, "复合材料隔热层" English translation, "复合材料机匣" English translation, "复合材料集装箱" English translation, "复合材料结构" English translation, "复合材料结构力学" English translation, "复合材料绝缘系统" English translation
|
|
|
