| 1. | Powder treatment of kiln firing mister and compression molding
窑业喷雾塔及压制成型制程之粉尘处理。 |
| 2. | Pressed compacts are made under various pressures ranging from soompa to looompa
压坯在500到1000mpa的压力下压制成型。 |
| 3. | J69 series compound friction brick press is the special equipment for pressure moulding of magnesia - carbon brick , high alumina brick and thin fire brick
是镁碳砖高铝砖薄耐火砖压制成型的专用设备。 |
| 4. | This has made it possible to omit post - forming operations to a remarkable extent , thereby cutting costs and shortening delivery times
大幅简化了压制成型后的后处理工序，使成本削减，交货期缩短成为了可能。 |
| 5. | May also perform calibration , pressure equipment , wheel molding , cold extrusion molding metal parts , powder metallurgy products , the pressure molding process
也可从事校正、压装、砂轮成型、冷挤金属零件成型、粉末冶金制品的压制成型工艺。 |
| 6. | Ea - 7709j is a type of amino molding compound . it is suitable for injection process with good performance , and also for transfer or compression process
本产品属于氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。 |
| 7. | J53 series double - disc friction press applies to cross - forging , extruding , trimming , bending and correcting of ferrous metal as well as pressure molding of refractory materials
适应于有色及黑色金属的横锻挤压切边弯曲校正及耐火材料等制品的压制成型等工作。 |
| 8. | Ea - 7708j is a type of amino molding compound with fiberglass . it is suitable for injection process with good performance , and also for transfer or compression process
本产品是玻璃纤维增强的氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。 |
| 9. | Al2o3 ceramic wafer substrate had average pore size about 10 m and upper porosity over 40 % , which was added pore - forming agent of graphite and shaped by pressing
采用压制成型制备的添加石墨成孔剂的圆片状al _ 2o _ 3陶瓷支撑体具有较小的平均孔径( 10 m左右)和较高的孔隙率( 40以上) 。 |
| 10. | His product is general and kind of phenolic moulding materials , it is suitable for injection process with good performance , and also for transfer or compression process gained the ul94 certificate
本产品属通用类酚醛模塑料，适宜于注塑成型，工艺性能良好。也适用于传递成型或压制成型。通过阻燃性能认证。 |
