Mobile
Log In Sign Up
Home > chinese-english > "初始应变" in English

English translation for "初始应变"

initial strain

Related Translations:
初始:  initial
初始冲刷:  incipient scour
初始同步:  initial synchronization
初始梯度:  initial gradient
初始和:  initial sum
初始区域:  primary area
初始斑点:  initial spot
初始计数:  initial count
初始螺旋:  incipient spin
初始结晶:  primary crystallization
Example Sentences:
1.The superplastic behavior of tc6 titanium on the condition of different temperature and different strain rate was explored
本文对不同初始应变速率和变形温度条件下tc6钛合金的超塑性变形行为进行了系统研究。
2.The effects of temperature and strain rate were analyzed too . furthermore , the tensile fracture surface of tc6 titanium was analyzed by sem
分析了tc6钛合金在变形过程中不同变形温度、初始应变速率对流变应力的影响规律,并且对变形温度、初始应变速率在tc6钛合金超塑性变形中的显著性进行了探讨。
3.The initial condition should be defined firstly in the structural analysis of the cable - support system . there are two important control parameters of the initial condition : initial shape and initial strain of the cable . 2
缆索支承体系的结构分析应当首先确定体系的初始状态,初始状态的两个重要折控制参数是:初始索形和初始应变; 2
4.In order to predict the deformation load and energy , the stress - strain state in the workpiece , we should have the knowledge of the constitutive relationships relating the flow - stress of deformed materials to strain , strain rat and temperature
本文就是在这一背景下,在综合考虑变形温度、初始应变速率的基础上建立了tc6钛合金本构关系的非线性模型,为制定其合理的制造工艺提供理论依据。
5.In the static analysis of the suspension bridge , the initial shape and initial strain of the main cable under bridge - finished condition should be defined firstly , then the bridge - finished condition should be chosen as the initial condition , under which the fem model was built . 3
悬索桥成桥恒、活载作用下的静力分析,首先需要确定成桥状态下主缆索的初始索形和主缆索的初始应变,再以成桥状态为初始状态建立有限元模型; 3
6.Here , fem is applied in the analyses of i ) fiber axial stress and interphase shear stress in fragmentation tests during initially applied strain , ii ) influence of temperature on the stress transfer across the interface , iii ) modulus and thickness of the interphase and their influence on interfacial stress transfer , iv ) interfacial debonding process , and v ) fragment aspect ratio , contact friction along the interface and their influences to the interfacial stress transfer efficiency
在论文的这部分工作中,使用有限元法描述和分析了逐节断裂试验中初始应变下的纤维轴向应力和界面相剪切应力,温度对界面应力传递的影响,界面相模量和厚度、纤维节长宽比、界面脱粘过程、界面接触中的摩擦效应等因素对逐节断裂试验中应力传递的影响。
Similar Words:
"初始引导程序" English translation, "初始引导员" English translation, "初始引液泵" English translation, "初始隐含价值" English translation, "初始印刷" English translation, "初始应力" English translation, "初始应力法" English translation, "初始应力缺陷" English translation, "初始应用程序" English translation, "初始应用块" English translation