| 1. | Measurement of the field distribution in a cold model of rfq resonant cavity
加速器腔体电场分布的冷模测量 |
| 2. | Types of plastics moulding compounds ; moulding compounds for cold moulding
塑料模塑化合物种类.冷模塑用模塑化合物 |
| 3. | Cold moulding compound
冷模塑料 |
| 4. | The simulated experiments of the driving force for natural cycle in self - cleaning evaporators
自动清洗式蒸发器自然循环推动力的冷模试验 |
| 5. | The high efficient and saving - energy evaporators of fouling prevention and natural circulation
自然循环自动清洗式蒸发器推动力冷模试验研究 |
| 6. | In order to measure the mixing characteristic , different temperature spout test method was used . the room air was used as main airflow and ofa
为了较为准确地测量气流的混合特性，冷模试验采用了不等温射流方法。 |
| 7. | Good agreement is obtained between present cfd predictions and published experimental data of solari and bell [ 77 ] . the maximum standard error of the result is 18 . 9 % . the results can reflect the phenomena of different circulation area along the height of liquid layer and above the inlet baffle
在1 . 2米塔径的冷模筛板塔上，提出使用热膜流速仪通过在平面内旋转探针测量三维流速的新方法，与计算结果的对比有力地说明了该方法是正确的。 |
| 8. | The cold model tests were completed on the mixing characteristics between the reburning airflow and main airflow or between ofa and main airflow in a cold model test - bed according to the practice situation of 6 # boiler in jianyou power plant in sichuan provice and the requirements of industrial tests for low nox reburning test project from state electric power company . the cold simulated experimental study included : 1
针对四川省江油电厂6 #煤粉锅炉的实际情况,以及国家电力公司低nox再燃技术试验项目工业试验的具体要求，在一个四角喷燃煤粉锅炉冷模试验台上，对原型锅炉内再燃气流和燃尽气流( ofa )与主燃烧气流之间的混合特性进行了冷模试验研究。 |
| 9. | At the same time the number of holes for liquid flowing , gas flowing and blocked to the number of total holes was defined as liquid flowing ratio , gas flowing ratio and blocked ratio . the experiment was made with in - diameter 500mm column using water - air system , the ratio was first delected in detail by multi - path conductivity gauge for the compound tray with free area 20 % and 25 % respectively
采用多路电导测试仪，在直径500mm的冷模塔内，以空气-水为介质，首次较系统地测量了开孔率为20和25的复合塔板的通气、通液和阻塞筛孔的数量比例，获得了通气率、通液率和阻塞率随气液变化的基本规律。 |
| 10. | Different disposal style for the reburning air & burning out air ( tangential or front and rear walls ) and their disposal heights . 2 . different momentums of ofa ( under the condition of constant airflow of primary area and condition of constant flux inputted simulated boiler )
冷模试验范围包括： 1 、再燃风和燃尽风的不同布置方式（切向布置和对墙布置） 、布置高度； 2 、不同燃尽风动量（炉内总进风量不变和燃烧器主气流不变两种情况） ； 3 、再燃风、燃尽风的不同组合与主气流之间的混合。 |
