| 1. | Tertm thermal - expansion resin transfer molding
热膨胀树脂传递模塑 |
| 2. | Standard practice for transfer molding test specimens of thermosetting compounds
热固化合物传递模塑试样的标准操作规程 |
| 3. | Fibre - reinforced plastics - methods of producing test plates - part 7 : resin transfer moulding
纤维增强式塑料制品.试验板的生产方法.第7部分:树脂传递模制法 |
| 4. | Selection of tests for material properties of transfer molding compounds for electronic and microelectronic encapsulation
电子元件及微电子元件封装用传递模塑化合物材料性能试验的选择 |
| 5. | Ea - 7709j is a type of amino molding compound . it is suitable for injection process with good performance , and also for transfer or compression process
本产品属于氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。 |
| 6. | Ea - 7708j is a type of amino molding compound with fiberglass . it is suitable for injection process with good performance , and also for transfer or compression process
本产品是玻璃纤维增强的氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。 |
| 7. | Resin transfer molding ( rtm ) has drawn more attention in the last decade because its manufacture cost is significantly lower than traditional techniques of fabricating fiber - reinforced composites
树脂传递模塑resintransfermolding ( rtm )是近年来飞速发展的一种低成本高效率的复合材料成型技术，目前已被广泛应用于航空、汽车等工业中。 |
| 8. | Ea - 7504j is a type of amino molding compound modified by phenol , which is added fiberglass as reinforcement . it is suitable for injection process with good performance , and also for transfer or compression process
本产品是以苯酚改性的三聚氰胺-甲醛树脂为基体树脂，以有机纤维增强的改性氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。 |
| 9. | Ea - 7501j is a type of amino molding compound modified by phenol , which is added fiberglass as reinforcement . it is suitable for injection process with good performance , and also for transfer or compression process
本产品是以苯酚改性的三聚氰胺-甲醛树脂为基体树脂，以玻璃纤维增强的改性氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。 |
| 10. | Ea - 7503j is a type of amino molding compound modified by phenol , which is added fiberglass as reinforcement . it is suitable for injection process with good performance , and also for transfer or compression process
本产品是以苯酚改性的三聚氰胺-甲醛树脂为基体树脂，以玻璃纤维增强的改性氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。 |
