English translation for "涡轮流量计"
|
- turbine flowmeter
turbine meter
turbo flow meter
turbo-blowmeter
turning vane
Related Translations:
惰性气体流量计: inert gas flowmeterinert-gas flow meter 涡轮式风扇: turbine fanturbo fan 涡轮排水泵: turbo-extractor pump 深井涡轮泵: deepwell turbine pump 注水涡轮泵: turbine injection pump
- Example Sentences:
| 1. | Measurement of gas flow in closed conduits - turbine meters
封闭管道中气体流量的测量涡轮流量计 | | 2. | Liquid hydrocarbons - volumetric measurement by turbine meter system
液态烃体积测量涡轮流量计计量系统 | | 3. | Analysis on influence factor of the turbine flowmeter in multiphase flow measurement
多相流测量中涡轮流量计的影响因子分析 | | 4. | Abstract : clibrating turbine flow meter is traditionally static meter - factor . this thesis introduces the theory and practice method of calibrating the dynamic character of turbine flow meter
文摘:涡轮流量计传统上只进行稳态校准，即只校准其(稳态)仪表系数。本文阐述了校准涡轮流量计动态响应特性的理论和实施方法。 | | 5. | It can automatically match rotational speed generator , electromagnetic rotational speed sensor and electromagnetic turbine flowmeter . moreover it can adapted measured signal that is 1v ~ 300v voltage and 1hz ~ 2500hz frequency
能自动匹配测速发电机、电磁式测速传感器和电磁涡轮流量计，适应电压峰峰值从1伏以下至300多伏、频率从1hz以下至2500hz以上的被测信号。 | | 6. | The measurement of oil / water two - phase flow is primarily accomplished by the combination of total flow rate and holdup measurement , and at present , the rotator flowmeter is used to measure the total flow rate . since the rotator flowmeter has movable parts , which makes its responsibility behave nonlinearly under poor environment of me under hole whose fluids have very complex and changeful characteristics and affects the measurement precision . what ' s more , the widely used centralized measurement instrumentation meets problems in oil wells characterized with high production or high water cuts
通常油水两相流测量主要是通过总流量和持率的测量组合来完成的，目前在总流量的测量中主要使用的是涡轮流量计，由于涡轮流量计具有可动部件使其在流体特性复杂多变的恶劣井条件下的响应呈非线性变化规律，影响测量精度，此外，普遍采用的集流型测试仪器在高产井及含水率高的油井中使用也遇到困难，为此，一种新型的适合非集流型点测的测试方法和测试仪器亟待发展和推广。 | | 7. | There are five parameters need to be measured . there are five channels for input : the displacement of casting - roller , the rotate speed of casting - roller , the pressure of casting and rolling , the casting temperature and the water - speed of cooling water . they are measured by raster , photoelectric coder , strain pressure sensor , thermocouple and turboflowmeter
系统需要进行监测的参数有五个，即有五路输入信号：铸辊位移、铸辊转速、铸轧压力、浇铸温度、冷却水流速，分别采用光栅、光电编码器、应变式压力传感器、热电偶和涡轮流量计作为检测元件。 |
- Similar Words：
- "涡轮联轴器" English translation, "涡轮量计" English translation, "涡轮流量变送器" English translation, "涡轮流量变速器" English translation, "涡轮流量传感器" English translation, "涡轮流量计计量系统" English translation, "涡轮轮毂" English translation, "涡轮螺浆组合" English translation, "涡轮螺桨发动机" English translation, "涡轮螺桨发动机；涡轮螺桨飞机" English translation
|
|
|
